ORDERING INFORMATION


V SERIES - MODEL NUMBERS (4Digits)
1st Digit

Type
V3 = 3-Way
V4 = 4-Way-2 pos.
V5 = 4-Way-2 pos./Dual Inlet
V4...3P = 4-Way-3 pos.
V5...3P = 4-Way-3 pos. 		2nd Digit

  Port Size
  1 = 1/8" npt
  2 = 1/4" npt
  2 = 1/4" npt
  4 = 1/2" npt  		3rd & 4th Digit

  Actuator/Return-2 position
  00 = Basic/Spring
  01 = Palm Button/ Manual
  02 = Palm Button/ Spring
  03 = Handball/ Manual
  04 = Handball/ Spring
  06 = Finger Tip/ Spring 


08 = Pedal/ Spring
09 = Treadle/ Manual
10 = Treadle/ Spring
11 = Roller Cam/ Spring
12 = Ball Cam/ Spring
15 = Double Pilot
16 = Single Pilot 
V4 		    2			10
Example: V4210 = 4-Way, 2 pos. 1/4" single inlet treadle w/spring return

Note: Modifications & some custom valve numbers can be created by combining primary model numbers with many of
the below noted primary modifications.

PRIMARY MODIFICATIONS - 2 & 3 POSITION VALVES
Manual Control Valve Suffixes

A = Special tg holes
D = Detent
G = Heavy duty spring
H = Hydraulic (Low Pressure)
HD = Heavy duty actautor 		- 2 Position valves 

LP = Low pressure pilot   
NO = Normally open   
P = Pilot return   
PM = Panel mount   
R = Diverter valve   

S = Selector valve
T = Light duty spring
V = Viton seals
X = X201 mufflers in ports
Y = Shorter hand ball assy. 3" OAL
Manual Control Valve Suffixes-3 Position Valves

-To order 3 position valves, add the following suffix to 4-way, 2 pos. primary valve numbers

3P = 3 position, closed center, spring to center    3 PD = 3 position, closed center, detented
3PO = 3 position, open center, spring to center    3POD = 3 position, open center, detented

Example:  V4103-3PD = 4-Way, handball, 3 pos., closed center, detented

DESIGN FEATURES:  NEXT>